For Calculation of Properties of Air (Psychrometric Calculations)
Cyber – PSYCHRO
for Psychrometric Calculations (Properties of Air)
• Valuable Tool for HVACR Engineers & Designers
• All Important Processes are readily available, to cover a wide range of calculations
• With any two values as Input, all other Air Propertiescan be obtained
• Charts can be generated and Calculations can be made for any Altitude
• Calculations as per Internationally Accepted Methods
• Calculations can be made in both SI and IP Units
• PSYCHRO produces neat Graphs
• Reports can be saved to Text file
Air Properties
Air Properties can be calculated with the following Options:
• At Saturation for a given Dry Bulb
• Dry-bulb & Wet-bulb
• Dry-bulb & Dew point
• Dry-bulb & Rh
Additionally, when special requirements demand, PSYCHRO can also calculate Air Properties with any two acceptable Values out of the following 8 parameters:
• Dry-bulb
• Wet-bulb
• Dew Point
• Relative Humidity
• Humidity Ratio
• Enthalpy
• Saturation Pressure
• Specific Volume
Processes
Often-used processes are readily available. They can cover a wide range of Calculations and the out-put can be obtained as a Text Report. Option is available to view both Reports and Charts.
Processes covered by PSYCHRO are:
• Heating of Moist Air
• Cooling of Moist Air
• Mixing of Two Streams
• Injection of Water into Moist Air
• Heat & Moisture Gain
• Air-Conditioning
• Evaporative Cooling
• Cooling Tower
• Any Two Points
Units
Calculations can be made in both SI and IP Units. It is possible to alternate between the two systems of Units at any point.
Altitude
It is possible to pre-set Altitude and all calculations are made for this pre-selected value.
• Charts can be generated for any Altitude
• Calculations can be made for any Altitude
Charts
Psychrometric Charts can be constructed for the following Limits:
• Normal Temperature
• High Temperature
• Low Temperature
• User Defined Limits
These charts (for a selected Altitude) can be viewed on screen.